Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
34
n
BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF THE GAS SUPPLY
n
Check the appliance is gas sound after completion
of service. When checking for gas leaks do not use
washing up liquid – this can corrode. Use a product
specically manufactured for leak detection.
n
Do not use reconditioned or unauthorised gas
controls.
n
Disconnect from the electricity supply before
servicing, particularly before removing any of the
following: control panel, side panels, hotplate tray
or any electrical components or covers.
n
Before electrical reconnection, check that the
appliance is electrically safe.
1 Panels
1.1 To Remove the Control Panel
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull o all the control knobs. Remove the handrail (Fig. 12.1).
Using a 2 mm Allen key, undo the 2retaining screws in the
base and side of each handrail support and remove.
Remove the 3 xing screws (A) from the underside of the
control panel (Fig. 12.2). Remove the 2 screws (B) that were
hidden by the handrail supports. Lift the control panel clear,
taking care not to damage or strain the wiring.
Disconnect the wiring from the rear. Re assemble in the
reverse order when replacing the leads refer to the wiring
diagram
1.2 To Remove the Side Panels
n
DISCONNECT FROM THE ELECTRICITY SUPPLY
.
Remove the control panel (see 1.1). Pull the cooker forward.
Remove the 4 retaining screws for each panel (1 at the front
base, 1 on the top and 2 at the rear).
Reassemble in the reverse order.
12. Servicing
Grub Screw
Grub Screw
Fig. 12.1
ArtNo.255-0015 - 110DF - Elise removing the control panel
B B
A A A
0
100
140
180
220
0 0
0 0
0
0
0
100
140
180
220
0
Fig. 12.2
Loading ...
Loading ...
Loading ...