Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
32
A
B
ArtNo.311-0010 Injectors
A – Jet, B – Jet
Conversion from Natural Gas
(1.0 kPa) to LPG X Propane
(2.54 kPa)
n
A suitably competent person must perform the
conversion. After conversion the installation must
comply with the relevant regulations and also the
local electricity supply company requirements. Read
the instructions before converting this appliance.
n
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead
to prosecution.
n
When servicing or replacing gas-carrying
components disconnect from the gas supply before
starting operation. Check the appliance is gas sound
after completion.
n
DO NOT use reconditioned or unauthorised gas
controls.
n
Disconnect from the electricity and gas supply
before conversion.
n
Before electrical reconnection, check that the
appliance is electrically safe.
Hotplate
Injectors
Remove the burner caps and heads. Remove the old jets
(Fig. 11.1). Fit the new jets (see the ‘Technical Data’ section
at the back of this book for the correct jets). Reassemble in
reverse order.
Bypass Screw Adjustment
Removing the Control Panel
Pull o all the control knobs. Remove the handrail (Fig. 11.2).
Using a 2 mm Allen key, undo the 2retaining screws in the
base and side of each handrail support and remove.
Remove the 3 xing screws (A) from the underside of the
control panel (Fig. 11.3). Remove the 2 screws (B) that were
hidden by the handrail supports. Lift the control panel clear,
taking care not to damage or strain the wiring.
Bypass Screw Adjustment
Turn the bypass screw on each control clockwise to the stop
(Fig. 11.4).
Ret the control panel. Locate the holes in the top edge on
the tags on the inner panel and replace the xing screws in
the bottom edge.
11. Conversion to LP Gas
Fig. 11.1
Grub Screw
Grub Screw
ArtNo.255-0015 - 110DF - Elise removing the control panel
B B
A A A
0
100
140
180
220
0 0
0 0
0
0
0
100
140
180
220
0
ArtNo.0102-0011 - Screwing
the control valve bypass screw
Fig. 11.2
Fig. 11.3
Fig. 11.4
Loading ...
Loading ...
Loading ...