Loading ...
Loading ...
Loading ...
User’s Manual
2-9
Note:
3. The VSL program allows multiple users to connect to the
network scanner at anytime. Yet, the scanner operation can be
used by one user at a time. If the network scanner is being
used by other user, you will be prompted with a message to
connect the scanner later. When the scanner is available, you
will also be prompted with a message to connect the scanner
and start scanning your document.
4. If the network scanner has not been found, it is probably the
scanner and your computer are not in the same LAN. In this
case, you can assign a specific IP address of the scanner to let
[Virtual Scanner Link] automatically search the scanner. Click
the [Option] button, type your IP address on the [Searching
Address] field (1), then click the [+] button (2) and finally
click [OK] (3) to complete.
5. Searching Time: When the program is launched, it
automatically searches the scanner in the network in 5 seconds
(default). The searching time can be changed from a range of 5
to 20 seconds.
6. If the [Virtual Scanner Link] program has been closed and
then launched again, [Virtual Scanner Link] will automatically
search and connect the network scanner it has previously
connected to.
(1)
(3)
(2)
Loading ...
Loading ...
Loading ...