Loading ...
Loading ...
Loading ...
TEMPERATURE CONTROLLED HI POWER COOKING
AND AUTOMATIC HOLD WARM
The Temperature Control Meat Cooking Guide and
Reheating Guide on pages 16 and 17 will tell you which
multi-power setting and doneness Temperature are
recommended for the food you re cooking.
When cooking with Temperature control, the Timer is
not used.
I. Place Temperature Probe in
food, with the first inch of Sensor
in center of food. Adjust the
length of Temperature Probe by
sliding the Grommet, so that the
Sensitive Area of the Probe can
always be placed in the center of
meat. Probe should be in a level
direction or on an angle as
shown,
2. P)ug Temperature Probe into
socket on side of oven,
Caution: Do not plug the
Pointed End of the Temperature
Probe into the socket.
Note: You do not need to touch COOK CONTROL
when you are cooking with HI (max power). However,
you may touch COOK CONTROL. The Light above
COOK _,_llgo on and the word "FI[" will show in the
Display Window. This is to tell you that the Oven will
work at HI (highest microwave power) unless a
different power setting is chosen.
6. Touch START. The Oven
begins cooking, and you will be
able to see the temperature of
the food rising in the Display
Window. A Tone will sound for
one second when the tempera-
ture is reached.
The Oven will switch into Hold
Waml to keep the food at the set
temperature. The Cook Control
Setting changes to 10 (WARM).
To be sure the correct
temperature is being held, touch
TEMP CONTROL, The "holding"
temperature will show in the
Display Window. The Hold Warm
will continue for 60 minutes after
the food reaches the chosen
temperature, or until the Door is
opened or STOP is touched.
,-
3. Touch CLEAR.
4. Touch TEMP CONTROL,
The Lights above TEMP and
below STAGE 1 will go on, and
"F" will show in the Display
Window.
5. Choose the food temperature
and touch the corresponding
Numbers, For example, ifthe
recipe calls for doneness at
120°F, you would touch numbers
"I", "2" and "0" (the temperature
next to Rare Beef on the Tempe-
rature Guide). When you touch
"120", the Display Window will
read "I20F". Ifthe Temperature
Probe is not plugged into the
socket, the Probe Light will flash
and the Oven w_llnot work.
If Door is opened, the Hold
Warm will stop.
To reset, simply touch TEMP
CONTROL and corresponding
Numbers,
Note: The highest temperature
that can be set is 185°F.
18
Loading ...
Loading ...
Loading ...