Loading ...
Loading ...
Loading ...
7
Installation
Location
● Choose a mounting location away from humid areas, water sources, burning products or any
equipment that can radiate heat.
● Select an area on the wall or cabinet, which is free from cable, fuel or brake lines. There is a
vent hole at the back of the unit for cooling purpose, do not block it.
● Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not
pressed against the heat sink.
Installing the unit
● Before finally installing the unit, connect the wiring temporarily and make sure the unit and the
system can work properly.
● Fix the unit to the wall using 4 self-tapping screw as indicated in the illustration.
Loading ...
Loading ...
Loading ...