Loading ...
Loading ...
Loading ...
Problem solving guide
140
Problem Cause and remedy
The sensor controls do
not respond.
You have selected the Display| QuickTouch| Off set-
ting. So when the steam oven is switched off, the
sensor controls do not respond.
As soon as the steam oven is switched on, the
sensor controls will respond. If you want the
sensor controls to always respond even when the
steam oven is switched off, select the Display|
QuickTouch| Onsetting.
The steam oven is not connected to the power sup-
ply.
Check that the steam oven plug is correctly inser-
ted into the socket.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off sensor control until
the display switches off and the steam oven re-
starts.
The fan can still be
heard after the appli-
ance has been switched
off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will switch itself off automatically after a while.
A humming sound can
be heard after switching
on the appliance, during
operation and after
switching off the appli-
ance.
It is quite normal and does not indicate any fault
with the appliance. It happens when water is being
pumped through the system.
After moving house, the
steam oven no longer
switches from the heat-
ing-up phase to the
cooking phase.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif-
fers from the old one by at least 300m.
To adjust the boiling temperature, you need to de-
scale the steam oven (see “Cleaning and care –
Descaling the steam oven”).
Loading ...
Loading ...
Loading ...