Loading ...
Loading ...
Loading ...
References
Trouble Checks
Youmayhave problems thatcan be fixedwitha few minor adiustn_ents.
Look for the type of problem you are having below and then try the
suggestions to get your TV going again. For warranty information see page 32,
Trouble
Checks and Adjustments
Power
TV willnot turnon
No picture,no souncibut
TV has power
Picture
Blank screen orUnusable
Signalappearson screen
Plug.TV
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press "IV.
Make sure batteries are placed in the remote the right way. See batteries
on page Z
Unplug TV for a few minutes and then turn it on again.
Check antenna connections.
Check position of Cable/Air feature. See page 27.
Try another channel. Irmctive channel may be tuned.
Make sure component connected to the VIDEO INPUT jacks is turned on
ifyouchoosechannel00.
Make sure "IVis tuned to the same channel as the switch on backof VCR
if.watchinga VCR.
Make sureTV/VCR buttonon VCR isincorrectpositionwhen usingVCIL
Try anotherchannel.
Scanthechannels.
Picturepoor,sound okay
picture-in-Picture
Can't get two different
channels in picture-in-picture
Check antenna connections.
Adjust TV picture. See pages 16-17.
Make sure smaU picture is tuned to channel 00.
Make sure the component connected to the back of the TV is turned on.
Make sure avideo cable is also connected to _e TV's VIDEO INPUT jack
if using an S-VHS component.
Make sure the AUDIO and VIDEO OUT jacks on the VCR, Laserdisc
player, or Camcorder are connected to the TV's VIDEO and AUDIO IN
jacks.
Make sure VCR1 Channel is, set to Disabled. See page 9.
No picture while using
picture-in-picture with
S-VHS VCR or camcorder
Make sure avideo cable is also connected _o the TV's VIDEO INPUT jack.
3O
Loading ...
Loading ...
Loading ...