Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting -tips
Possible Causes What To Do
Clock and timer do Plug on range is not completely * Make sure electrical [)lu,_ is l)lugged,, into a live, properly
not work inserted ha the electrical outlet, gr_)uuded outlet.
A fuse ha your home * Replace tile ti/se or reset tile circuit breaker.
may be blown or the
circuit breaker tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Oven will notseff-clean The oven temperature is * _Mlow the range to cool and reset the controls.
too high to set a self-cleaJa
operation.
Oven controls improperly set. * See the Using the self-cleaning oven section.
The probe is plugged into * Remove the probe from the oven.
the outlet in the oven.
(on some models)
"Crackling" or This is the sound of the * This is normal.
"popping" sound metal heating and cooling
during both the cooking and
clemfing functions.
Excessive smoking Excessive soil. * Touch the CLEAR/OFFpad. Open the windows to
during a clean cycle rid the room of smoke. Wait until the LOCKEDlight
goes off. _'ipe up the excess soil and reset the clean
cvcle.
Oven door will not Oven too hot. * Allow the oveu to cool below hwkiug temperature.
open after a clean cycle
Oven not clean after a Oven controls not properly set. * See the Using the self-cleaning oven section.
clean cycle Oven was heavily soiled. * Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to sell_cleau
again or for a h)uger period of time.
"LOCKED"flashes The self-clema cycle has been * Close the oven door.
in the display selected but the door is not
closed.
"LOCKED"light is The oven door is locked * Touch the CLEAR/OFFpad. Allow the oven to cool.
on when you want because the temperature
to cook inside the oven has not
dropped below the
locking temperature.
"F--anda number You have a function error code. • Disconnect all power to the range for at least 30
orletter, flash seconds and then reconnect power. If the flu]ction
in the display error code repeats, call for service.
42
Loading ...
Loading ...
Loading ...