DSR-250N User Manual

Loading ...

D-Link DSR-Series User Manual 43

Section 5 - Connect to the Internet

Load Balancing

Path: Network > Internet > WAN Mode

This feature allows you to use multiple WAN links (and presumably multiple ISP’s) simultaneously. After

conguring more than one WAN port, the load balancing option is available to carry trac over more than one

link. Protocol bindings are used to segregate and assign services over one WAN port in order to manage internet

ow. The congured failure detection method is used at regular intervals on all congured WAN ports when in

Load Balancing mode.

This router currently supports three algorithms for Load Balancing:

Round Robin: This algorithm is particularly useful when the connection speed of one WAN port greatly

diers from another. In this case you can dene protocol bindings to route low-latency services (such

as VOIP) over the higher -speed link and let low-volume background trac (such as SMTP) go over the

lower speed link. Protocol binding is explained in next section.

Spillover: If Spillover method is selected, the primary WAN acts as a dedicated link until a dened

bandwidth threshold are reached. After this, the secondary WAN will be used for new connections.

Inbound connections on the secondary WAN are permitted with this mode, as the spillover logic governs

outbound connections moving from the primary to secondary WAN. You can congure spillover mode

by using following options:

• Load Tolerance: It is the percentage of bandwidth after which the router switches to

secondary WAN.

• Max Bandwidth: This sets the maximum bandwidth tolerable by the primary WAN for

outbound trac.

If the link bandwidth of outbound trac goes above the load tolerance value of max bandwidth, the

router will spillover the next connections to secondary WAN.

For example, if the maximum bandwidth of primary WAN is 1Kbps and the load tolerance is set to 70. Now

every time a new connection is established the bandwidth increases. After a certain number of connections say

bandwidth reached 70% of 1Kbps, the new outbound connections will be spilled over to secondary WAN. The

maximum value of load tolerance is 80% and the minimum is 20%.

Note: The DSR-1000, DSR-1000N, DSR-500, and DSR-500N routers support the trac load balancing between physical

WAN port and a 3G USB Modem.

Load balancing is particularly useful when the connection speed of one WAN port greatly diers from another.

In this case you can dene protocol bindings to route low-latency services (such as VOIP) over the higher-speed

link and let low-volume background trac (such as SMTP) go over the lower speed link.

Loading ...

D-Link DSR-250N - Wireless N Unified Service Router