D-Link DSR-250N User Manual

Loading ...

D-Link DSR-Series User Manual 303

Appendix D - Log Output Reference

usage: rtparams rt_idx <0|1> per <0..100>

probe_intval <0..100>

DEBUG host %u.%u.%u.%u/if%d ignores WARNING

usage: acparams ac <0|3> RTS <0|1> aggr scaling

<0..4> min mbps <0..250>

DEBUG martian source %u.%u.%u.%u from WARNING

usage: hbrparams ac <2> enable <0|1> per_low

<0..50>

DEBUG ll header: WARNING

%s(): ADDBA mode is AUTO, __func__ DEBUG

martian destination %u.%u.%u.%u

from

WARNING

%s(): Invalid TID value, __func__ DEBUG %u.%u.%u.%u sent an invalid ICMP WARNING

%s(): ADDBA mode is AUTO, __func__ DEBUG dst cache overow WARNING

%s(): Invalid TID value, __func__ DEBUG Neighbour table overow. WARNING

%s(): Invalid TID value, __func__ DEBUG host %u.%u.%u.%u/if%d ignores WARNING

Addba status IDLE DEBUG

martian destination %u.%u.%u.%u

from

WARNING

%s(): ADDBA mode is AUTO, __func__ DEBUG martian source %u.%u.%u.%u from WARNING

%s(): Invalid TID value, __func__ DEBUG ll header: WARNING

Error in ADD- no node available DEBUG Unable to create ip_set_list ERROR

%s(): Channel capabilities do not match, chan

ags 0x%x,

DEBUG Unable to create ip_set_hash ERROR

%s: cannot map channel to mode; freq %u ags

0x%x,

DEBUG

ip_conntrack_in: Frag of proto %u

(hook=%u),

ERROR

ic_get_currentCountry not initialized yet DEBUG

Unable to register netlter socket

option

ERROR

Country ie is %c%c%c, DEBUG Unable to create ip_conntrack_hash ERROR