Loading ...
Loading ...
Loading ...
EN
ASSEMBLY
Position the hob in the worktop opening made respecting the dimensions indicated in the Instruction.
Check that the appliance is in a good condition after having removed the outer packaging and internal wrappings from around the various loose
Never leave the packaging materials (cardboard, bags, polystyrene foam, nails, etc.) within children’s reach since they could become potential
sources of danger.
•
may be used provided it is capable of withstanding the appliance temperatures. Ensure that the supply
connection point is accessible with the appliance installed. To facilitate the shield may need to be removable.
The cooktop has a special seal which prevents liquid from getting into the cabinet.
Strictly comply with the following instructions in order to correctly apply this seal:
•
•
Cut the seal in 4 parts of the necessary length to positionning it on the 4 edges of the glass.
•
Fig. 1
Fig. 2
NOTE: the power supply cable must be long enough to permit its upward extraction.
Ca
ution: Do not allow the glass (A) lay directly on the work top. It is the bottomshelf (B) that has to be in touch with the wo
2
•
•
the plate into the hole made in the cabinet.
Loading ...
Loading ...
Loading ...