Loading ...
Loading ...
Loading ...
Tone Volume
To change the TONE volume setting,
1. Press "SETTINGS." Settings menu will appear on display.
2. Press the up or down arrows until "TONES ..." appears on the display.
3. Press "ENTER," and "RESTORE FACTORY DEFAULTS: NO" appears on the display.
4. Press the down arrow until "VOLUME: HIGH" appears on the display.
5. Press "ENTER" to change volume level. The current value will flash.
6. Use up and down arrows to select the desired volume level. Setting options are “HIGH”, “LOW” and “OFF.”
7. Press "ENTER" to confirm volume level setting.
8. To exit the Settings menu, press "SETTINGS.”
Oven Settings
Description of
Tone
Used in…
Number
of Tones
Duration
(measured
in seconds)
1 Minute Left Min/Sec or Cook Timer 1 1
Autostart
Cooking mode or timer starts without
pressing Set or Enter
2 0.1
End of Hold Cook Time/Stop Time 4 1
Timer Expired Min/Sec or Cook Timer 3 1
Failure RTD error/Latch error 5 1
Invalid Entry Error in programming 3 0.1
Periodic Reminder
After cooking mode finishes or during
programming to prompt action by user
1 0.1
Key Press Information Entry 1 0.1
Invalid Key Information Entry 3 0.1
Repeat Key Information Entry 0 0
Oven Light Off Turning light off 2 0.1
Oven Light On Turning light on 1 0.1
Panel is Locked Information Entry 3 0.1
Setpoint Reached Cooking Modes 1 1
Meat Probe Roasting Modes 3 1
Meat Probe within
10 degrees
Roasting Modes 2 1
Searing Time
Reached
Roasting Modes 3 1
Start Time Reached Various Cooking Modes 1 1
Panel is Unlocked Information Entry 2 0.1
13
Loading ...
Loading ...
Loading ...