Loading ...
Loading ...
Loading ...
15
CONVERTING THE GAS TYPE (cont.)
L-C2-463
REV 0 - 1412011255
4. Remove the burner cap and carefully lift the burner
up and out, clearing the ceramic electrode (see Fig.
15-1), and pulling the burner tube away from the
orifi ce, located on the end of the orifi ce holder on
the left side of the unit (see Fig. 15-2).
Note: You do not have to lift the burner completely out
of the unit to access the orifi ce.
5. Using a
3
/
8
" socket, remove orifi ce from the orifi ce
holder (see Fig. 15-2) and check the number
stamped on the orifi ce face.
6. If an orifi ce change is necessary, replace the orifi ce
with the correct sized one.
7. Replace the sideburner tube over the orifice,
aligning the burner over the electrode, taking care
not to detach it from the wire.
8. Replace the burner retaining clip (underneath
burner), and burner cap.
9. Repeat steps 3. through 8. for the second burner.
10. Replace the control panel, being sure to reconnect
all wires. Reference the CONTROL PANEL
REMOVAL section for wiring details. Replace the
control knobs.
11. Replace the cooking grid and sideburner cover.
Fig. 15-1 Remove burner
Fig. 15-2 Orifi ce location
Orifi ce
holder
Orifi ce located at
end of orifi ce holder
Loading ...
Loading ...
Loading ...