BlueStar BSEWO30ECSD 30 Inch Single French Door Electric Wall Oven

USE & CARE MANUAL - Page 38

For BSEWO30ECSD.

PDF File Manual, 46 pages, Read Online | Download pdf file

BSEWO30ECSD photo
Loading ...
Loading ...
Loading ...
38
SETTINGS
The Settings screen is used by the technician during installation or service calls to optimize the oven’s
performance. If you reach this screen by accident, press Cancel to return to the previous screen.
CHANGING TEMPERATE SCALE FROM C TO F, OR F TO C
1. Press Other on the Main Menu display. Figure 1
2. Press Settings on the Other display. Figure 2
3. Press Enter Password. Figure 3
4. Enter 12345. Figure 4
5. Press F or C located in the top right of the screen.
6. Press SAVE & EXIT. Figure 3
Figure 1 Figure 2 Figure 3 Figure 4
HYSTERESIS & OFFSETS
The hysteresis setting determines how quickly the oven responds to a change in temperature sensed by
the probe. Increasing this number will make the oven react slower while decreasing the number will
make it react faster. The factory default and recommended setting is 2.
Oven probe offset allows you to calibrate the center of the oven temperature to the probe location. A
number followed by a + will decrease the center oven temperature while a number followed by a will
increase the center oven temperature. The oven is factory calibrated and changes to this setting are not
recommended.
Product Probe offset allows you to calibrate the product probe. A number followed by a + will decrease
the probe temperature while a number followed by a will increase the probe temperature. The probe
is factory calibrated and changes to this setting are not recommended.
Bottom Bake offset allows you to calibrate the baking stone temperature to the probe location. A
number followed by a + will decrease the stone temperature while a number followed by a will
increase the stone temperature. The oven is factory calibrated and changes to this setting are not
recommended.
Loading ...
Loading ...
Loading ...