Loading ...
Loading ...
Loading ...
33
Lower Oven Control, Clock and Timer
INCREASE or DECREASE Pad Speed
You can change the response speed of these pads in
10 increments.
While the oven is off and the time of day shows in the display,
press and hold both the INCREASE and DECREASE pads at
the same time for 2 or 3 seconds; “Adj” will flash in the
display. The speed levels range from LO to HI; LO is the
slowest speed and HI is the fastest.
Use the INCREASE or DECREASE pad to change the
response rate of these pads. Press START to store the new
speed and return to the time of day display.
Questions and Answers
Q. When I came home, the display showed “PF”
instead of the time. What happened?
A. Your home had a brief power failure while you
were gone. Nothing is wrong with your clock—
just reset it.
Q. Can I change the clock while I’m cooking food
in the lower oven?
A. No. The clock cannot be changed during any
program that uses the oven timer or the display.
You must either stop those programs or wait until
they are finished before changing the time.
Q. Can I check the time of day while the display is
showing timer function?
A. Yes. Simply press CLOCK and the time of day
shows for as long as your finger is on the pad, plus
3 additional seconds.
Power Failure
If “PF” appears in the display, you had a power
failure. When the power went out, the current time
was stored in the control’s memory. Then, when the
power was restored, the time of day was continued.
For example, after a 5-minute power interruption,
your clock will be 5 minutes slow.
To reset the clock, press CLOCK. Enter the correct
time of day by pressing the INCREASE or
DECREASE pad. Press START.
To check the time of day when the display is
showing other information, simply press CLOCK.
The time of day shows for as long as your finger is on
the pad, plus 3 additional seconds.
If you have several clocks in your kitchen, you may
wish to blank the time of day on your oven.
If so, press and hold CLOCK, then press STOP
TIME. Although you cannot see it, the clock
maintains the correct time of day. It will reappear for
the duration of any function that displays a start time
and stop time.
Pressing CLOCK will make the time of day reappear.
NOTE: The time of day cannot be changed during a
lower oven cooking operation.
Loading ...
Loading ...
Loading ...