Loading ...
Loading ...
Loading ...
Cu Thickness Adju ment
interval - As Required
Ice thickness adjustments are made using the
control panel as follows:
LIGHT,
UP DOWN BLACKOUT MODE
POWER ARROW DISPLAY ARROW & OTHER FUNCTIONS
Figure 27
1.
2.
To enter the thickness adjustment mode:
a. Touch and hold the UP ARROW button.
b. Touch and release the DOWN ARROW
button three times, then release the UP
ARROW button.
c. The display will switch to "0," to confirm
the thickness adjustment mode has
been selected.
The factory setting is "0," and the total
range of adjustment is -5 to +5. Use the
UP ARROW button to raise the setting
and thicken the ice bridge, or the DOWN
ARROW button to lower the setting to thin
the ice bridge.
3.
4.
5.
Touch and release the LIGHT button key to
exit the ice thickness adjustment mode.
Remove all ice from the storage bin.
Ice cubes in any given batch will vary, so
it is necessary to choose cubes from the
sample area (Figure 28) for comparison
when making adjustments. If further
adjustments are desired, repeat steps 1
through 4.
Operation
SAMPLE AREA
Figure 28
Loading ...
Loading ...
Loading ...