Loading ...
Loading ...
Loading ...
7
Installation
Level Refrigerator & Adjust Doors (if
necessary)
Guidelines for fi nal positioning of your refrigerator:
• All four corners of the cabinet must rest fi rmly on the
fl oor.
• The sides should tilt
¼ inch (6 mm) from front to back
(to ensure that doors close and seal properly).
• Doors should align with each other and be level.
Most of these conditions can be met by raising or
lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1 Slightly open freezer drawer.
2 Remove the toe grille (follow the illustrations below for
the toe grille on your model).
Figure 1: Remove screws and then gently pull forward.
Figure 2: Lift the toe grille and gently pull forward.
3 You can raise or lower each door. Use a ⅜ inch socket
wrench to turn the adjustment screws (one per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw counterclockwise.
4 Ensure both doors are bind-free with their seals touching
the cabinet on all four sides and that cabinet is stable.
5 After unit is leveled, lower anti-tip leg until it contacts the
fl oor.
6 Install the toe grille by fi tting into place (replacing screws
on some models).
Remove
Mounting
Screws
Shoulder
Screw
Clip
Shoulder
Screws
Toe
Grille
Raise
Lower
Anti-tip
Leg
Door
Door
CAUTION
Do Not loosen or remove these (3) hex head
screws.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
Loading ...
Loading ...
Loading ...