Loading ...
Loading ...
Loading ...
13
Controls
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze Activates a faster rate for freezing food.
fast ice Increases the production of ice.
energy saver Keep this switch set on energy saver (light on) for lowest energy usage. If
moisture appears on the cabinet between the doors, pressing this button will
turn the light off and enable an electric heater used to reduce moisture on the
cabinet between the doors.
water fi lter Press and hold for three seconds to reset after fi lter change.
air fi lter Filter condition status is always displayed when door is open. Press and hold
for three seconds to reset after fi lter change.
temp mode Touch to toggle display from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned off based on user preference.
The sounds are muted when the red indicator is lit. Warning signals will stay
active.
default settings Resets all refrigerator settings such as temp, temp display and tones to their
factory default settings.
on off Press and hold for three seconds to turn off the cooling system to clean the
refrigerator. It also turns off the ice maker. The temperature displays will read
OFF.
IMPORTANT
Pressing the power on/off icon does not turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting. The temperature dis-
play will begin to blink with the fi rst touch. The display will time out after 10 seconds and return
to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm will
sound and the door ajar indicator will display on the bottom display of the
control panel. The alarm is turned off by closing the door. The mute sounds
key will blink to prompt the reset of any active alarms. Press this key to reset
any system alarms.
High Temp In the event of a high temperature condition, the temperature display will blink
and display “HI”. After 20 minutes, the alarm will sound and the high temp
indicator will be red on the bottom of the control panel. The mute sounds
icon will illuminate until pressed, acknowledging the alarm, at which time the
highest temperature reached will be displayed and the refrigerator will resume
normal operation. In case the high temp alarm is not acknowledged at the fi rst
alarm sound time out, when the door is fi rst opened, the alarm sound will be
repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and the
temperature display will blink until the mute sounds icon is pressed, acknowl-
edging the alarm. Other modes may be turned off until the alarm is acknowl-
edged. The power fail alert is turned off and the refrigerator will resume
normal operation. The high temp alarm may also be illuminated until a safe
operating range temperature has been reached.
Loading ...
Loading ...
Loading ...