Loading ...
Loading ...
Loading ...
Cleaning and maintenance
69
EN
11. Remove the cover from the evaporation
tray and dry it with the sponge supplied.
12. We recommend positioning the
supplied sponge inside the evaporation
tray.
13. Press the control knob to start emptying
the remaining solution from the reservoir.
The residual solution is discharged into the
evaporation tray.
Because the quantity of solution remaining
is greater than 500 ml, drainage of the
solution into the evaporation tray will take
place in two different steps in order to
facilitate drying. The display indicates
“step1 of 2” after completion of which,
drainage stops. You have to press the
control knob again in order to complete the
drainage with “step 2”. When finished
“reservoir cleaning complete” appears on
the display.
14. Use the supplied sponge to remove the
residual solution from the evaporation
tray.
15. Press the control knob to exit from the
reservoir cleaning procedure.
After having cleaned the reservoir
with the solution of water and citric
acid, carry out at least one “clean
reservoir” cycle using ordinary
water in order to rinse out any
residues there may be from the
reservoir.
Loading ...
Loading ...
Loading ...