Loading ...
Loading ...
Loading ...
B102188-0-0114Page 16
GRILL ASSEMBLY
Connect Igniter Wires and Install Battery
1. Attach ground and igniter wires to the igniter as shown in Figure
15.
2. Remove push button cap and insert AA battery, positive side
UP, as shown in Figure 15.
IGNITOR
CONNECTIONS
Figure 15
Smoker Drawer
1. Attach drawer support bracket to inside front of grill body with
10-24 x 3/4” machine screw and 10-24 nut. See Figure 16.
2. Slide the smoker box through the opening in the grill body. See
Figure 17.
Figure 16
3. Slide the venturi on to the valve assembly.
4. Raise the unsecured end of the burner bracket and slip it over
the 1/4-20 x 1 1/2 Phillips Truss Head Screw as shown in Figure
13. The screw will t into the hole on the burner bracket.
Figure 13
5. Slide the bridge pin through the hole in the 1/4-20 x 1 1/2 Phil-
lips Truss Head Screw as shown in Figure 14.
Figure 14
Lip resting on
casting ledge
Loading ...
Loading ...
Loading ...