Loading ...
Loading ...
Loading ...
B102188-0-0114 Page 15
GRILL ASSEMBLY
Ignitor Wire
Note: Install the Ignitor Ground Wire before installing the burner.
1. Connect the ground wire to the ground lug on the collector box
before installing the burner into the grill. See Figure 11.
Figure 11
Note: Install the Ignitor Ground Wire before installing the burner.
Install the Burner
1. Insert the burner assembly into the grill bottom with the venturi
tubes facing the front of the grill. See Figure 12.
2. Carefully slide the wires through the same hole in the bottom
of the grill.
Figure 12
Burner Bracket Securing Bolt
1. Insert the 1/4-20 x 1 1/2 Phillips Truss Head Screw from the
underside of the grill and secure with the 1/4-20 Hex Nut. See
Figure 9.
Figure 9
Note: If the Grill Head is installed on a PCB1, PSCB or DCB1,
make sure the cart shield is not installed until the burner
bracket securing bolt is installed.
2. Install Grill Head on a Cart or Post Mounting (see Cart or Post
Installation Instructions that come with the mounting option).
Heat Shield / Wind Shield
Place the heat and wind shield in the grill bottom.
See Figure 10.
Figure 10
Note: The heat shield cannot be installed until after the grill is
installed on a post or cart.
Loading ...
Loading ...
Loading ...