Loading ...
Loading ...
Loading ...
19
INSTALLATION INSTRUCTIONS
6. Installation (all models)
Your Fisher & Paykel ActiveSmart™ refrigerator is
fitted with front and rear rollers, designed for moving
the product in the forwards and backwards direction.
Avoid moving the product in a sideways direction
as this may damage the rollers or the floor
covering/surface.
A Your refrigerator will arrive with the front feet
wound up making moving the product into its
final location a simple task.
B Roll the refrigerator into its final position making
sure there is the correct air gap between the
product and surrounding cabinetry. See minimum
clearance in cabinetry dimensions table.
C Adjust the front feet down until the refrigerator
is leaning backward with the front approximately
10mm higher than the back. This will ensure a
good door closing action.
(Non French door models only)
D Aligning your refrigerator with cabinetry.
z
Align the sides of the refrigerator with the cabinetry
by adjusting the hinge side front foot.
z
Adjust the handle side foot until it touches the floor
and takes a small amount of weight.
z
Once the refrigerator is in place and aligned with
cupboards/alcove gently push on the front top and
check if the product is rocking or stable.
7. Levelling of refrigerator doors
(French door models only)
z
For uneven surfaces, front feet can be used to
align the 2 doors.
z
If left hand door is too low, then unscrew the left hand
foot to lift up the cabinet until the two doors top
edges are aligned.
z
If right hand door is too low, then adjust the right
hand foot in the same way.
Even door alignment
Uneven door alignment
Raise the
front of the
refrigerator
Lower the
front of the
refrigerator
Refrigerator feet
Loading ...
Loading ...
Loading ...