Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
42
5.10 To Remove the Tall Oven Element
n
Disconnect from electricity supply.
Remove the tall oven inner back (see 5.1).
Remove 2 screws from the top of the element and 1 from the
bottom of the element inside the oven (Fig. 11.6). Carefully
lift the element out, disconnect the terminals connected to
the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull
cooker forward to gain access to the rear, remove screws
securing the electric cover to the back sheet and remove cover
and disconnect the terminals from the rear.
Fit new element, and reassemble in reverse order. Check
operation of oven.
Doors
6.1 To Remove the Grill Door
Remove the left-hand side panel (see 1.2). Remove the plinth
(4 screws) and the central vertical cover (5screws). Remove
the 2 countersunk screws (1 each side) securing the grill hinge
arms to the front of the grill chamber.
Note: The arms are spring tensioned. Carefully remove the grill
door. Retain the gaskets.
Reassemble in the reverse order, making sure that the gasket
is tted between the hinge arm and the front of the grill
chamber.
6.2 To Replace the Main Oven Door
Open the oven door. Support the door and loosen the 2
screws securing the upper hinge and gasket to the cooker
front (Fig. 11.7).
n
The door is heavy, so take care.
Support the door and remove the screw nearest the hinge pin
(Fig. 11.8). Swing the hinge up and away from the door hinge
pin. Lift the door away from the lower hinge and remove.
Reassemble in reverse order.
6.3 To Adjust the Main Oven Door Angle
The bottom hinge of the main oven door can be adjusted to
alter the angle of the door (Fig. 11.9). Loosen the bottom
hinge xing screws and use the notch and a at bladed
screwdriver to move the position of the hinge to set the hinge
position
(Fig. 11.10).
Retighten the hinge screws.
6.4 To Replace the Main Oven Door Outer Panel
Move the cooker forwards to gain access to the sides.
Open the main oven door slightly and remove the 4front
panel xing screws from the door sides (2 each side), (Fig.
11.11). Carefully lift o the outer door panel.
Remove the door handle from the panel by unscrewing the 2
retaining nuts.
Fit the door handle to the new panel.
Fit the panel to the door. Reassemble in reverse order.
ArtNo.320-0002a Proplus oven door side screws
ArtNo.320-0006 Oven door hinge adjustment 1
ArtNo.320-0007 Oven door hinge adjustment 2
Eect of hinge adjustment – exagerrated for clarity
Centreline of hinge pin
Oven door omitted for clarity
ArtNo.320-0003 Oven door latch
B
ArtNo.320-0004 Oven door keep
ArtNo.320-0001 Door hinges
1
ArtNo.320-0001 Door hinges
2
Fig. 11.7
Fig. 11.12
Fig. 11.8
Fig. 11.13
Fig. 11.9
Fig. 11.10
Fig. 11.11
Loading ...
Loading ...
Loading ...