Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
33
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth xing screw
Inner plinth
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.215-0026 - Handle gaskets fixed
Art No 215-0028 - Handrail fascia fixings
Fig. 9.18
Fig. 9.19
Fig. 9.20
Fig. 9.21
Final Checks
After completing installation check operation of the
appliance.
Note: The clock must be set before the ovens will work. See
‘The Clock’ section for instructions on setting the time of day.
Hotplate Check
Check each burner in turn (refer to the “Hotplate Burners”
on page 7 of the instructions).
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier in the instructions, and then
turn on the ovens. Check that the ovens start to heat up.
Note: The oven light bulb is not included in the guarantee.
Turn o the ovens.
Final Fitting
Fitting the Handles and Handrail
Remove the 4 mm Allen screws from the doors (Fig. 9.18). Fit
the door handles and secure using the 4 mm screws.
n
The handles should be above the xings.
Remove the 4 mm Allen screws from the top corners of the
fascia (Fig. 9.19). Fit the handrail in position and secure using
the 4 mm screws.
Fitting the Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (Fig. 9.20).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth
(Fig. 9.21). Adjust the height of the outer plinth by sliding it
up or down via the slotted hole.
Fitting the Splashback
Position the splashback on the rear of the hotplate and secure
with the screws supplied.
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
Loading ...
Loading ...
Loading ...