Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
Controls
3.1. To Replace the Ignition or Light Switch
n
Disconnect from the electricity supply.
Remove the control panel (see 1.1).
Note: The old switch may be destroyed during removal.
Remove the old switch from its bezel by gripping the switch
body behind the control panel and twisting sharply. Remove
the switch bezel by folding back the locking wings and
pushing forward.
To t the new bezel to the control panel: rst line up the raised
key on its body with the cut-out in the control panel and push
it in from the front.
Assemble the new switch to the bezel by lining up the key
sections and pushing home. Fit the new button by pushing in
from the front.
Replace the control panel in the reverse order and test for
correct operation.
3.2 To Replace the Clock
n
Disconnect from the electricity supply.
Remove the control panel (see 1.1). Pull o the timer control
buttons.
Undo the timer xing screws and remove the timer/mounting
bracket assembly from the control panel.
Remove the timer from its mounting bracket by depressing
the plastic lugs on the timer case, and at the same time pulling
the unit forward.
Reassemble in the reverse order. When replacing the leads,
refer to the wiring diagram. Check the operation of the timer.
3.3 To Change the Ignition Generator
n
Disconnect from the electricity supply.
Pull the cooker forwards to gain access to the cover box at the
rear of the cooker. Remove the screws securing the cover and
lift clear. Noting the position of the leads, pull o all the leads
to the generator. Slacken the 2 screws holding generator to
cooker and remove the generator.
Fit the new generator to the cooker and replace the leads.
Refer to the wiring diagram and reassemble in the reverse
order. Check the ignition performance.
Loading ...
Loading ...
Loading ...