Loading ...
Loading ...
Loading ...
RECOMMENDED OIL TYPE
Using the proper type and weight of oil in the crankcase
isextremely important. Check the oil before each use
and change the oi! regularly. Failure to usethe correct oil,
or using dirty oil, can cause premature engine wear and
failure.. Usea high-quality SAE 10W-30 weight oil of API
(American Petroleum Institute) service class SF,SG,SH.
ADDING OiL TO THE CRANKCASE
INITIAL USE
NOTE:This unit is shipped without oil In order to avoid
damage to the unit, put oil in the crankcase before you
attempt to start the unit
Your unit is supplied with one 1.7fluid oz (50mL) bottle
ofSAE 10W- 30 SF,SGorSH oil (Fig.5)_
NOTE:Save the bottle of oil. It can be used to measure
the correct amount during future oil changes. See
Changing The Oil (p.13).
t. Unscrew the top of the bottle ofoil and remove the
sealcovering the opening_ Replacethe top.,(Fig,,S),
Fig S
2. Place the unit on a level surface (fig.6).
Fig, 6
3,.Remove the oil plug I dipstick from the crankcase (FigoT).
4. Pour the entire bottle ofoil into the oil fill hole (Fig° 7)°
Fig, 7
\
oil Fill Hole
Check oil before each use and change asneeded. Refer
to Changing the Oil (p13),
5, Wipe up any oil that may have spilled and reinstall
the oil plugldipstick.
WARNING:
Overfilling crankcase reay c,_use hal oil to ddp |rare
air _ale_and smoke to come oh1 Item the exhaust,
Check and maintain the p_'opo_toil _evel in the crank
caee; it _sireportant and c_nnoI be overemphe_zed-
Check the oil before each usa an_ change as
needed. See Changtng the On 11_t3)
J
6
LE HRIALLRIGHTSRESERVED2008-200g
Loading ...
Loading ...
Loading ...