Loading ...
Loading ...
Loading ...
12 www.dimplex.com
Fireplace Installation
electric shock or injury to persons,
always use a licensed electrician.
WARNING: Ensure that the
circuit on which the replace is to
be installed has the power cut off
at the service panel until installa-
tion is complete.
2. Lift replace and insert into
opening. The replace's
mounting trim should be ush
against the wall (Figure 7).
3. Use the supplied bubble level
to level the replace within the
framing, adjust as required.
4. Drive four supplied mounting
screws through the four mount-
ing holes located on the inside
surface of the replace chassis,
into wall studs (Figure 8).
5. Refer to Front Glass Installa-
tion section for nal installation
procedures.
Front Glass Installation
1. Pour and evenly distribute the
supplied media in the Media
tray of the firebox (Figure 9).
2. Carefully mount front glass
assembly so that the front
glass hooks hang on the front
glass mounts on the fireplace
(Figure 9).
3. Use the supplied four Phillips
sheet metal screws to fasten
the glass assembly tabs to the
fireplace (Figure10).
Figure 9
Front tray
Front glass
assembly
Figure10
Tab
Hooks (4)
Mounts (4)
Loading ...
Loading ...
Loading ...