Loading ...
Loading ...
Loading ...
11
Fireplace Installation
wall anchors.
6. Install the bottom support
bracket to the wall centered
with the wall mounting bracket,
using the appropriate mount-
ing hardware, 13 ¾" (350
mm) below the wall mounting
bracket. (Figure 5)
7. Remove the center screw from
the bottom of the replace.
(Figure 6)
8. Hang the replace from the
bracket.
9. Install the removed screw
through the bottom support
bracket into the replace.
10. Refer to Front Glass Installa-
tion section nal installation
procedures.
Flush Mounted Installation -
2x8 Framing
CAUTION: Two people will be
required for various steps of
this procedure.
1. Prepare a wall with a framed
opening of 73 in. (185.4 cm)
wide x 18 ½ in. (47 cm) high
(Figure 7).
!
NOTE: It is recommended
that the bottom of the unit not be
mounted higher than 40 in.
(102 cm) from the ground to main-
tain an optimized viewing angle of
the ame.
WARNING: Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of re,
Figure 7
2 x 8 Framing
Mounting hole
Mounting hole
Wall
surface
Figure 8
Loading ...
Loading ...
Loading ...