Loading ...
Loading ...
Loading ...
W415-1139 / B / 01.08.13
9
EN
Due to the many different fi nish materials used on walls, it is highly recommended that you consult your local
builder before you install this appliance in the wall.
Select a location that is not prone to moisture and is located at least 36" (914.4mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper etc.
3.3 RECESSED INSTALLATION
For models EFL60H and EFL72H use the following instructions:
A. Use the mounting template supplied to mark out the location for the brackets. The supplied wall mount
brackets will be centered between the two sets of slots, on the back of the appliance. These brackets
have four slots and two hooks.
B. Mark out location, then mount the brackets onto the wall using the eight supplied screws. These
brackets MUST have the hooks facing upward and be level. NOTE: It is strongly recommended that
the mounting brackets be screwed into the wall studs where possible. If the wall studs cannot
be used, ensure that the supplied plastic anchors are used to affi x the bracket to the wall and
the brackets are adequately secured.
C. With the wall mounting brackets installed have two people lift the appliance up and insert the four
hooks on the brackets into the four slots on the back of the appliance.
D. Check the appliance for stability ensuring that the brackets will not pull free from the wall, causing the
appliance to fall.
E. Install the two wall securing brackets to the bottom of the appliance using four screws, as shown
below.
F. Secure the wall securing brackets to the wall using two screws, as shown below.
NOTE: DISTANCE "A" MEASURES 20" (510.0mm) ON MODEL EFL60H AND 15 1/2" (394.0mm) ON
MODEL EFL72H.
WALL MOUNT BRACKET
HOOKS
SLOTS
WALL MOUNT BRACKET
HOOKS
SLOTS
A
Measurements are taken from the body.
Sides, back and top 0" (0mm)
3.3.1 MINIMUM CLEARANCE TO COMBUSTIBLES
EF
EFL48 ILLUSTRATED
EF
Loading ...
Loading ...
Loading ...