Loading ...
Loading ...
Loading ...
25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A 9
1. Locate wall bracket mounting position relative
to wall studs (Fig. 8). Install the supplied
wall bracket with six 3/8" diameter fasteners
(Fig.10.1).
Note: Three holes are available at each fastening
site to allow capture of studs or supports
within the wall.
2. Locate and cut utility hole (Fig. 10.2) in wall
using Fig. 9 dimensions.
3. Rough in utilities. Wall mount bracket
dimensions can be used as a template.
§ Water: 1/2" FNPT
§ Drain: 3/4" MPT
4. Lift dispenser onto wall bracket positioning
unit so that hook on back of dispenser is
captured by wall bracket support angle
(Fig.10.3).
5. Install two 1/4" X 20 screws through bottom of
wall bracket into bottom of dispenser to secure
dispenser to wall bracket (Fig. 10.4).
6. Install supplied 1/2" MPT X 3/8" push-in
adapter onto 1/2" FNPT water supply.
Fig. 8 – Wall bracket location guide
16.00"
(406 mm)
0.75"
(19 mm)
6.00"
(15.2 cm)
25HI425A
19" (48.3 cm)
50HI425A
21" (53.3 cm)
1.00" (25 mm)
WALL STUDS
WALL STUDS
ANCHOR POINTS
0.438" (11 mm)
CLEARANCE
FRONT VIEW
TOP VIEW
25HI425A
13" (33.0 cm)
50HI425A
15" (38.1 cm)
2.00" (51 mm)
3.44" (8.7 cm)
12.37" (31.4 cm)
3.53" (9.0 cm)
WALL CUTOUT
Fig. 9 – Wall mount, utility location
10.69" (27.1 cm)
3/4 COPPER TUBE
0.77" (2.0 cm)
1.43" (3.6 mm)
FRONT VIEW
6.70" (17.0 cm)
POWER CORD EXIT
3.99" (10.1 cm)
POTABLE WATER
3/8 COPPER TUBE
Fig. 10 – Wall mount bracket and fastener
requirements
3
1
2
4
Loading ...
Loading ...
Loading ...