79579402210 Use & Care Guide

Loading ...

CONNECTING THE WATER LINE

8. FLUSH OUT THE TUBING

Turn the main water supply on and

ushoutthetubinguntilthewater

is clear.

 Shutthewateroatthewater

valve after about one quart of

waterhasbeenushedthroughthe

tubing.

9. CONNECT THE TUBING TO THE

REFRIGERATOR

NOTE: Before making the connection to the

refrigerator, be sure that the refrigerator power cord is

not plugged into the wall outlet.

1)Removetheringplug(1)fromthevalvelocatedatthe

top of such device.

2)Placecompressionnutandtheferuleattheendofthe

pipeline. Insert pipeline into the connection valve as

far as possible. Hold tightly while holding pipeline.

3)Holdontothepipefromthehandlesorgrabbers

locatedbehindtherefrigerator,loosingrstthebolt

holding the handle. Afterwards, insert pipe into the

holeandtightenbolttonalize.

10. TURN THE WATER ON AT THE SHUTOFF VALVE

Tighten any connections that leak.

11. PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate

against the back of the refrigerator or against the wall.

Push the refrigerator back to the wall.

12. START THE ICEMAKER

Set the icemaker power switch to the ON position. The

icemaker will not begin to operate until it reaches its

operatingtemperatureof15°F(–9°C)orbelow.Itwill

then begin operation automatically if the icemaker

power switch is in the ON (I) position.

CAUTION: Check to see if leaks occur at the water line

connections.

Loading ...

Use & Care Guide - Page 31