Loading ...
Loading ...
Loading ...
25
WATER FILTER
WATER FILTER
Itisrecommendedthatyoureplacethewaterlter:
• Approximately every 6 months.
• When the Filter Exchange indicator turns on.
• When the water dispenser output decreases.
• When the ice cubes are smaller than normal.
Remove the old water filter
NOTE:Replacingthewaterltercausesasmallamount
ofwater(around1oz.or25cc)todrain.Placeacupunder
thefrontendofthewaterltercovertocollectanyleaking
water.Holdthewaterlterupright,onceitisremoved,to
prevent any remaining water from spilling out of the water
lter.
1. Makesuretoturnothehouseholdwatersupply.
2. Turntheltercounterclockwiseandthenpull
downandout.Makesuretorotatethelterdown
completely before pulling it out of the manifold hole.
NOTE: The substitute cap must be retained for the future.
Ifthelterisremovedandnotreplaced,itisnecessaryto
reinstall the substitute cap to prevent water leaks from the
lterhousing.
Replace with a new water lter.
1. Removetheredcapfromthelter.
2. Holdthelterwiththeunlocksymbol facing
towards you, as shown in the picture below. Insert the
lterintothelterreceptacleontheleftsideofthe
refrigerator compartment.
3. Pushthewaterlterupintothelterreceptacleand
rotate it clockwise to lock it into place. Once installed
correctly, the lock symbol
should be facing
youandyoushouldnotbeabletorotatethelter
clockwise any more.
NOTE: After installation, if you notice that the lock symbol
isnotfacingyouoryoucancontinuetorotatethelter
clockwise;removethelterandrepeatinstallationto
prevent water leaks.
After installing the water lter:
1. Replace the shelf to the initial position.
2. Afterinstallinglter,turnonhouseholdwatersupply.
3. Dispense2.5gallons(9.46liters)ofwatertopurgethe
system, depressing and releasing the dispenser pad in
cycles of 30 seconds ON and 60 seconds OFF. Open
the refrigerator door and check the shelf area for
water leaks.
To purchase a replacement water lter, call 1-800-469-
4663 and ask for Part. No. ADQ72910907.
Loading ...
Loading ...
Loading ...