79579402210 Use & Care Guide

Loading ...

Using a

’’ socket wrench with a 2-Inch extension

and screwdriver, loosen the two bolts and one screw, and

remove the Bottom Hinge from right side of the housing.

Remove the Decorative Caps on the bottom of the

refrigerator housing. You will need these holes for the

Bottom Hinge.

Move the Bottom Hinge to the left side of the housing,

keeping the same orientation, and reattach with the two

boltsandonescrew.Theatscrewmustbeplacedonthe

exterior side of the hinge. Move the Decorative Bolt to the

hole on the lower right side of the housing.

Turn the refrigerator door upside down on a non-

scratching surface. Loosen the two screws to remove the

Bottom Hinge Pin Insert Bracket with the Hinge Pin Insert.

Hinge

Pin Bracket

Hinge Pin

Insert

Take out the Hinge Pin Insert and move the Bracket to the

other side of the door, keeping the same orientation.

Place the Hinge Pin Insert into the left side of the bracket.

Tighten the Hinge Pin Bracket to the door.

Hinge

Pin Bracket

Hinge Pin Insert

Withaat-headscrewdriver,carefullypryoand

remove the cover over the screw holes on the left side of

refrigerator housing.

Remove the outer lower Decorative Screw from the

housing at the area between the freezer and refrigerator

doors.(YouwillneedthisholefortheMiddleHinge

Bracket.)

FliptheMiddleHingeBracket,(angewillnowbeon

top)positionitonleftsideoftherefrigeratorandre-

attach with two bolts and a Phillips screwdriver. Place the

refrigerator door down over the pin on the bottom hinge.

Place the washer between the refrigerator door and

middle hinge and re-attach Hinge Pin to Hinge Bracket

with a ¼” socket wrench.

NOTE:

Brackethasbeenipped,butHingePinstays

in the same orientation with its hexagonal end facing

upward

Middle Hinge

Bracket

Flange

REFRIGERATOR INSTALLATION

Loading ...

Use & Care Guide - Page 16