Loading ...
Loading ...
Loading ...
e. Connect RED battery cable to positive (+)
battery terminal with bax bolt, fiat washer,
/ockwasher and hex nut (shownfull size below)
found in bag of par_ (Fig_5). TlghWn securely.
f. Connect BLACK ground cable to negative (-)
battery terminal with remaining he,,,:bolt, flat
washer, lockwasher and hex nut (shown full
size below) found in bag of parts (Fig. 5),
Tightensecurely.
.o@o
NOTE: IF YOU HAVE A WEAK BATTERY, SEE "*START-
ING YOUR TRACTOR WITH A WEAK BATTERY"
(PAGE 21),,
g, Using the slotted hole on oneside of the battery
support (Fig, 6) insert onebattery bolt into frame
slot (headofbo# down), Fastenthe batterybolt to
the terminalguard usingwingnut. (Bolts,nutsand
terminal guard found in bag of parts)
h. Assemble the remaining belt to other side of bat-
tory support and fastenterminal guard to it with
remainingwfngnut(shownfutlsizebalow)_ Tighten
wingnuts securelyby hand (Fig° 6),
ASSEMBL Y
WASHER
• LOCKWASHER
HEX
BOLTS
_eemm 0
L Replace air intake duct (Fig. 4)° Make sure
bottom llp of duct si= between battery and lip
of battery tray,
[ Removeplasb'c from tractor hood and close.
NOTE: USE TERMINAL ACCESS DOORS (FIG,, 6) FOR:
t. INSPECTION FOR SECURE CONNECTIONS
(TIGHTEN HARDWARE)
2, INSPECTION FOR CORROSION
3 TESTING BATTERY
4. JUMPING (IF REQUIRED)
5. CHARGING OF REQUIRED)
KEEPTERMINALAccEssDOORSCLOSEDI
WHEN NOT IN USEr ]
DO NOT ENGINE UNTIL MOWER
1
START
I
SUSPENSION BRACKET HAS BEEN RE-[
LEASED, SEE MOWER AND DRIVE BELT |
INSTALLATION,
I
BATTERY
BOLT
/
SLOTTED
HOLE
W_NG
NUT
/
FIGURE 5
WING NUT
TERMINAL
ACCESS
DOOR
TERMINAL
GUARD
bOLT
FIGURE a
Loading ...
Loading ...
Loading ...