Loading ...
Loading ...
Loading ...
REPAIR & ADJUSTMENT
1_ Starting your Tractor W/lh e Weak Battery
If your battery is too weak to start the engine, it
should be recharged, If "_umpercables" are used
for emergency starting, follow thisprocedure:
NOTE; YOUR TRACTOR IS EQUIPPED WITH ,_, 12
VOLT NEGATIVE GROLINDEO SYSTEM. THE OTHER
VEHICLE MUST ALSO BE A =t2 VOLT NEGATIVE
GROUNDED SYSTEM,
LEAD.ACID BATTERIES GENERATE EX..
PLOSIVE GASES. KEEP SPARKS, FLAME
AND SMOKING MATERIALS AWAY FROM
BATTERIES° ALWAYS WEAR EYE PRO-
TECTION WHEN AROUND BATTERIES.
a_ Connect each end of the RED cable to the
POSITIVE (+) terminals of each battery
(taking care not to short against chassis)
(Fig 27j
b, Connect one end of the BLACK cable to the
NEGA TIVE (-) terminals of fully charged
battery,
co Connect the other end of the cable to the L.H,
side pane/ bolt (Fig. 28J NOTE: KEEP
AWAY FROM GAS TANK AND BATTERY.
do Disconnectcablesin reverseorder:
I, L.H_ sidepanel bolt (Fig. 28)_
2, Negadve terminals of fully charged batten/o
3. Posidveterminals:
|MPORI"ANT; DO NOT USE YOURTRACTOR BAT.I
. t ,Y ToSTA,'rOT" "W"'CL SIJ
IDLE SPEED
SCREW
MIXTURE
VALVE
GOVERNOR CONTROL
L_VER
FIGURE 29
2, Throttie Control Cable Adjustment
Never attempt tO change maximum engine speed.
This is preset at _e factory (3600 ± 100 RPMJ
and shou/d only be changed by a qua/ified service
technician who has the necassarF equipment.
a. Remove hood, page 23.
b. Loosen casing clamp screw until throttle cable
is free to move,
c, Move throttle control (on the dashboard) to
"FAST" posiu_on,
dr Pull throttle cable light (until swivel beneath
carburetor is against side of quarter clrcle)_
Retlghten casing clamp screw,
_ REFER TO "STARTING THE ENGINE,"}PAGE 13o
21
Loading ...
Loading ...
Loading ...