Loading ...
Loading ...
Loading ...
Pass the
refrigerator
Before
installation
Warning
Disposal of the
old appliance
Passthe refrigeratorlaterallythrough the access
dooras shown in the right figure.
Install the freezer and refrigerator
compartment doors
Mount them inthe reverse sequence of removal after they passthrough the access
door.
Water supply installation
• Automatic icemaker operation needs water pressure of 21N121 psi (1.5N8.5
kgf/cm 2)(That is, an instant paper cup (6 oz. or 180 cc)will be fully filled within
3 seconds.)
• If water pressure is less than 21 psi (1.5 kgf/cm2). It is necessary to purchase a
separate pressure pump for normal automatic icemaking and cool water feed.
• Keepthe total length of the feed water pipe tube within 26' (8 m). Be careful for the
tube to avoid being kinked. If the tube is longer than 26' (8 m), the pressure may
drop to an unacceptable level.
• Install the water supply line where it will not be affected by heat.
• Connect to potable water supply only.
This appliance contains fluids (refrigerant and lubricant) and is made of parts and
materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material
and can be reused after rework (recycling).For recycling, please contact the local
agency.
Loading ...
Loading ...
Loading ...