Loading ...
Loading ...
Loading ...
110-120Volt, 60 Hz. Tool
Information
NOTE: The plug supplied on your tool
may not fit into the outlet you are plan-
ning to use. Your local electrical code
may require slightly different power cord
plug connections, if these differences
exist refer to and make the proper
adjustments per your local code before
your too] is plugged in and turned on.
In the event of a malfunction or break-
down, grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock This tool is
equipped with an electric cord having an
equipment grounding conductor and a
grounding plug, as shown. The plug
must be plugged into a matching outlet
that is properly installed and grounded in
accordance with all local codes and ordi-
nances.
Do not modify the plug provided, tfit will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
A temporary adapter may be used to
connect this plug to a 2-pole outlet, as
shown, if a properly grounded outlet is
not available. This tempo[ary adapter
should be used only until a properly
grounded outlet can be installed by a
qualified electrician. The green colored
rigid ear, lug and the like, extension from
the adapter must be connected to a per-
manent ground such as a properly
grounded outlet box.
Improper connection of the equipment
grounding conductor can result in a risk
of electric shock, The conductor with
insulation having an outer surface that is
green with or without yellow stripes is the
equipment grounding conductor. ]f repair
or replacement of the electric cord or
plug is necessary, do not connect the
equipment-grounding conductor to a live
terminal.
Ifthe grounding instructions are not com-
pletely understood, or if you are in doubt
as to whether the tool is properly
grounded check with a qualified electri-
cian or service personnel.
WARNING: If not properly
grounded, this tool can cause an
electrical shock, particularly when
used indamp locations, in proxim-
ity to plumbing, or out of doors, tf
an electrical shock occurs there is
the potential of a secondary haz=
ard, such as your hands contacting
the sawblade.
Properly
Grounded
Outlet
\
J_
/flu}
0
/n u_
3-Prong Plug
Grounding
Prong
Make sure this
Is Connected
toa Known
Ground
Green i_"_ I
Gro0n0,°gLo, I lll
a-Prong _1_'] i_._-
Plug %, li
Adapter
NOTE: The adapter illustrated is for use
only if you already have a properly
grounded 2-prong outlet.
7
Loading ...
Loading ...
Loading ...