Loading ...
_FULi-ONF YEAR WARRANTY ON CRAFTSMAN BENCHTOP TOOLS
If this Scroll Saw fails due to a defect in material or workmanship,
within one year from the date of purchase, RETURN IT TO THE NEAR=
EST SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will
repair it, free of Charge.
If this Scroll Saw is used for commercial or rental purposes, warranty
will apply for ninety days from the date of purchase.
This warranty applies only while this product is in the United States.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Sears, Roebuck and Co., D817 WA Hoffman Estates, IL. 60179
b_
Safety Instructions for Scroll Saw
Safety is a combination of common your scroll saw works. Read this manual
sense, staying alert and knowing how to understand this saw.
Safety Signal Words
DANGER: means if the safety informa- seriously injured or killed.
tion is not followed someone will be seri- CAUTION: means if the safety informa-
ous]y injured or killed, tion is not followed someone might be
WARNING: means ifthe safety informa- njured.
tion is not followed someone could be
Before Using The Saw
WARNING: To avoid mistakes
that could cause serious perma-
nent injury, do not plug the saw in
until the following steps are com-
pleted.
• Completely assemble and align saw
(see "Assembly and Alignment" sec-
tions w_hin).
• Learn the use and function of the
speed control ON-OFF knob, bevel lock
knob blade holders, blade support,
hold down, tension knob, and blade
guard. (See "Getting to Know Your
Scroll Saw" section.)
* Review and understand all safety
instructions and operating procedures
in this manual.
* Review the maintenance methods for
this saw. (See "Maintenance" section.)
- Read the warning label below, found on
the base of the saw.
1. Readmanualbefore usingsaw,
2. Wearsafelygoggleslhet meetANStZ87.1 S_ndards,
3. Besere blade is inslalladwlthteeth pointing down.
4, Properlyadjust helddow_,
S.' Keepfingersaway hem themovingblade.
S. DOnotronleve is_mme_tcutoffpiaces_untitblade has stopped.
7. Mnlntnlnp_per adiustznunt Ofblade tensio_.
8. Holdwed(piece fimlly _llales4 Ibetable.
9. Turnpower off a_dwait forblade tost_pbefere adlu_ng orservicinlD.
50_t700 RPM 1 PHASE 120 VOLT AC ONLY 60 HZ L2 AMPS
..... L ...... . _ ,
Loading ...
Loading ...
Loading ...