Loading ...
Loading ...
Loading ...
'ii
Alignment (Adjustments) (continued)
Removing Pin End Blades
WARNING: To avoid injury from
accidental starting, always: turn
switch "OFF" and unplug power
cord from outlet before removing
or replacing the blade,
NOTE: Saw comes with pin end bfades.
if you are going to use piain end blades,
refer to the instructions under "Installing
Plain End Blades".
* Loosen tension on blade by turning ten-
sion knob counterclockwise
about three full turns
oLoosen upper and lower blade holder
knobs by turning the blade holder
knobs counterclockwise _ about
three full turns. To make lower blade
holder access easier, till the tabte to
45°, and raise the arms to the up posF
tion using ascrewdriver to rotate the
motor shaft.
oRemove blade from the lower blade
holder by pushing down or_the upper
arm, releasing the pin end blade from
the lower blade holder. Remove blade
from the upper blade holder by slightly
lifting up on the blade and pulling for-
ward.
oseR
Tenslon Knob
Loosen
Upper
Holder
Lower Blade
Holder
14
.......
Loading ...
Loading ...
Loading ...