Loading ...
Loading ...
When Installing or Moving The Saw
Avoid Dangerous Environment. Use
the saw in a dry indoor place, protected
from rain. Keep work area wel! lighted.
To avoid injury from unexpected saw
movement:
oTurn saw off and unplug cord before
moving the saw.
- Place the saw on a firm level surface
where there is plenty of room for han-
dling and properly supporting the work-
piece.
. Support the saw so the table is level
and the saw does not rock.
o Bott the saw to the work surface if it
tends to slip, walk, or slide during oper-
ations like cutting long heavy boards, or
when using an auxiliarytabte.
° Never Stand On Tool. Serious injury
Before Each Use
Inspect your saw.
Disconnect The Saw. To avoid injury
from accidental starting, unplug the saw,
turn the switch off and lock out the switch
before changing the setup, removing
covers, guards or blade.
Check For Damaged Parts. Check for:
• Alignment of moving parts,
- Binding of moving parts.
° Broken parts,
• Stable mounting.
° Any other conditions that may affect the
way the saw works.
If any part is missing, bent or broken in
any way, or any electrical parts don't
work properly, turn the saw off and
unplug the saw. Replace damaged,
missing or failed parts before using the
saw again. Keep Guard In Place and in
working order,
Maintain Tools with Care. Keep the saw
clean for best and safest performance,
Follow instructions for lubricating.
Remove adjusting keys and wrenches
from tool before turning it on.
To avoid injury from jams, slips or
thrown pieces
° Use Only Recommended Accesso-
ries. (See "Recommended Accesso-
ries" section), Consult this owners
manual for recommended accessories.
could occur Jfthe tool tips or you acci-
dentally hit the cutting toot. Do not store
any item above or near the tool where
anyone might stand on the scroll saw to
reach that item.
To avoid injury or death from electri-
cal shock:
• Ground the saw. This saw has an
approved 3 conductor cord and a 3-
prong grounding type plug. Use only 3-
wire, grounded outlets rated 120 volts,
15 amperes (amps). The green con-
ductor inthe cord is the grounding wire.
To avoid electrocution, NEVER con-
nect the green wire to a live terminal.
oMake sure your fingers do not touch
the plug's metal prongs when plugging
or unplugging the saw.
Follow the instructions that come with
the accessories. The use of improper
accessories may cause risk of injury to
person.
• Choose the right size and style blade
for the material and the type of cutting
you plan to do.
° Make sure the blade teeth point down-
ward, toward the table.
• Make surethe blade tension is properly
adjusted,
• Keep Work Area Clean. Cluttered
areas and benches invite accidents.
Floor must not be slippery.
To avoid burns or other fire damage,
never use the saw near flammable liq-
uids, vapors or gases,
• Know Your Saw. Read and under-
stand the owners manual and labels
affixed to the tool, Learn its application
and limitations as well as the specific
potential hazards peculiar to this tool.
° To avoid injury from accidental contact
with moving parts, don't do _ayout,
assembly, or setup work on the saw
while any parts are moving.
• Avoid Accidental Starting. Make sure
switch is "OFF" before plugging saw
into a power outlet.
Loading ...
Loading ...
Loading ...