Loading ...
Loading ...
Loading ...
ii 111 • m ill ,
OPERATION
i ,J
KNOWYOUR CHAIN SAW (Fig, 6)
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the
illustrationswithyour uni_tofamiliarize yourseltwiththe locationofthe variouscontrolsand adjustments. Save thismanual
for future reference.
FRONT
HAt,K) GUARD _ _ H_NDLE STARTER
ROPE HANDLE
ON/STOP
CH/_N PRIMER
CRRFTgMRN°
CYLINDER COVER
FAST IDLE
LOCK
THROTTLE
LOCKOUT
REAR
HANDLE
BAR OIL
FILL CAP
FUEL MIX
STARTER FILL CAP /
HOUSING
ADJUSTING _1_
SCREW 11r
CHAIN TRAVEL
DIRECTION
CRfl
THROTTLE CHOKE _ I CLAMP
TRIGGER KNOB BAR CLAMP CHAIN NUTS
CATCHER
Figure6
Listed by Underwriters Laboratories, Inc.
in accordance with American National Standards for Gasotine-Powered Chain Saw,= Safety Requirements
(ANSI B175.1-1991).
The ONiSTOP SWITCH is used to stop the engine.
The STARTER ROPE HANDLE is used for starting the
engine.
The CHOKE KNOB activates the choke to provide addi-
tional fuel to the engine when starting a cold engine.
The THRO]_LE LOCKOUT prevents the THROTTLE
TRIGGER from being squeezed accidentally.
The FAST IDLE LOCK allows for faster engine speeds
during starting.
The THROTTLE TRIGGER controls engine speed.
The GUIDE BAR is designed to carry the chain.
The CU'I_'ERS are designed to cut the wood.
The BAR CLAMP NUTS are designed to hold the guide
bar after adjustments have been completed.
The ADJUSTING SCREW is designed to tension the
chain on the guide bar,
The PRIMER BULB circulates fuel to the carburetor.
-8-
Loading ...
Loading ...
Loading ...