Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
• Pullout 10" of rope and catch rope in notchin the pul-
ley.
• Carefullyturn the pulley twocomplete turnsclockwise,
keeping the rope against the notchto wind the spring.
• While holdingthe pulley ratchet, pullthe excess rope
throughthe starter ropehole.While holdingtension on
the rope, let rope slowly rewind intothe housing.
• Reinstall fan housing by aligning the fan housing to
the chassis. Then while holding the fan housing
against the chassis,pull the rope handle out until you
feel the fan housing drop into place against the chas-
sis. Slowly, let the rope rewind into starter housing.
• Reinstall the 4 fan housing screws and tighten the 2
cylinder cover screws.Fig 44.
Wind Up Spring
Figure 48
-24-
Loading ...
Loading ...
Loading ...