Yamaha HTR-5760 receiver

User Manual - Page 47

For HTR-5760.

PDF File Manual, 88 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions t_r those components.
(U.S.A. model)
1 Turn on the power of this unit and all
connected components.
2 Select the source component you want to
record from.
INPUT
or
G MD/C_-R TUNER SLEEP
OOQ
_vr_ DTV/_BL V-AU× _/Im CHI_
_OWlOVe. R2 r :_ [_a_0o
OOEi]
Remote controlFront panel
3 Start playback (or select a broadcast station)
on the source component.
4 Start recording on the recording component.
Do a lesl recording belore you slart an aclua[ recording.
When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
The setting of TONE CONTROL. VOLUME. "SPEAKER
LEVEL" (page 55) and programs does not alti:ct recorded
materiah
A source connected to the MULTI CH INPUT.jacks of this unit
cal)l)Ot be recorded.
S-Video and composite vide() signals pass independently
through this unit's video circuits. Therelore. when recording or
dubbing video signals, if your video source component is
connected to provide only an S-Video (or only a composite
video) signal, you can record only an S-Video (or only a
composite video) signal to your VCR.
Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R)jacks li>r recording.
Likewise. analog signals input to the AUDIO IN (L/R)jacks are
not output to the DIGITAL OUTPUT jack. Therefore. if your
source component is connected to provide only digital (or
analog) signals, you can only record digital (or analog) signals.
A give)) input source is not output on the same REC OUT
channeh (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
Check the copyright laws in your country to record from
records. CDs. ratio, etc. Recording of copyrighted material may
infringe copyright laws.
If yon playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when yonr player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.
1
43
Loading ...
Loading ...
Loading ...