Loading ...
Loading ...
Loading ...
• Remote control operation
AMP
Sound
field
program
buttons
Press AMP to select the AMP mode, then press
one of the sound field program buttons
repeatedly to select the desired program.
Tile name of the selected program appears in tile front
panel display.
CA_D
Program name
Choose a sound field program based on your listening prelerence.
and not on the name ol the program.
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when MULTI CH
INPUT is selected.
• Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz. then sound field
programs will be applied.
• Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to m\ioy 6.117.1-channel playback t_r multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital
Surround EX or DTS-ES decoders.
Press AMP to select the AMP mode, then press
EX/ES on the remote control to switch between
5.1 and 6.1/7.1-channel playback.
EX/ES
To select a decoder, press < / > repeatedly when
PLIIxMusic (etc.) is displayed.
AUTO (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optinmm decoder for playing
back the signal in 6.117.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.11
7.1 channels.
Decoders (select with < / >)
Yon can select t_om the following decoders depending on
the format of the software you are playing.
F::i....:[ :i:::.::H,:::,,.,,:i.e
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic Ilx movie decoder.
F:i....:i::i::=.::i"i_...i:ii_.:i.,:::.
For playing back Dolby Digital or f)TS signals in 6.1/7.1
channels using the Pro Logic Ilx nmsic decoder.
F'.i...."i:::"::_
For playing back Dolby Digital signals in 6.1/7.1 channels
using the Dolby Digital Surround EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS-ES decoder.
F './.
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital Surround EX decoder.
OFF (0F'F)
Decoders are not used to create 6.1/7.1 channels.
When "SURR B L/R SP" is set to SMLx I or LRGx I (see
page 54), the surround back channel will be output from the leli
SURROUND BACK speaker terminals.
I
33
Loading ...
Loading ...
Loading ...