Loading ...
Loading ...
Loading ...
m Only the front speakers produce sound
When the Stereo o1"Mono listening mode is selected,
only the front speakers and subwoofer produce
sound.
Check the Speaker Configuration.
41
N Only the center speaker produces sound
If you use the Dolby Pro Logic IIx Movie, Dolby Pro --
Logic IIx Music, or Dolby Pro Logic [Ix Game lis-
tening mode with a mono source, such as all AM
radio station or mono TV program, the sound is con-
centrated in the center speaker.
Depending on the input signal, some listening modes 33-37
cannot be selected.
N Can't select the Pure Audio listening mode
(European, Australian and Asian models) The --
Pure Audio listening mode cannot be selected while
Zone 2 is on.
N Can't get 6.1/7.1 playback
If no surround back speakers, front wide and front
high speakers are connected, or the Zone 2 speakers
are being used, 6.1/7.1 playback is not possible.
Make sure the speakers are configured correctly. 41
N The surround speakers produce no sound
When the T-D (Theater-Dimensional), Stereo or
Mono listening mode is selected, the surround
speakers produce no sound.
N The speaker volume cannot be set as required
(The volume cannot be set to +18.0 dB)
Check to see if a maximum volume has been set. 50
Make sure the speakers are configured correctly. 4"1
N The center speaker produces no sound
When the Stereo or Mono listening mode is selected, --
the center speaker produces no sound.
N Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on may degrade the
audio performance, so don't do it.
Make sure the speakers are configured correctly. 4"1
N The front high, front wide and surround back
speakers produce no sound
Depending on the current listening mode, no sound
may be produced by the front high, front wide and
surround back speakers. Select another listening
mode.
33
Make sure the speakers are configured correctly. 41
N The subwoofer produces no sound
When you play source material that contains no
information in the LFE channel, the subwoofer pro-
duces no sound.
N There's no sound with a certain signal format
Check the digital audio output setting on the con-
nected device. On some game consoles, such as
those that support DVD, the default setting is off.
N The Late Night function doesn't work
Make sure the source material is Dolby Digital,
Dolby Digital Plus, and Dolby TrueHD.
53
N About DTS signals
When DTS program material ends and the DTS bit- --
stream stops, the AV receiver remains in DTS listen-
ing mode and the DTS indicator remains on. This is
to prevent noise when you use the pause, fast for-
ward, or fast reverse function on your player. If you
switch your player from DTS to PCM, because the
AV receiver does not switch formats immediately,
you may not hear any sound, in which case you
should stop your player for about three seconds, and
then resume playback.
rl N
tl
ut 31.
d? tt
n_ N
When playing DTS program material, using the
pause, fast forward, or fast reverse function on your
player may produce a short audible noise. This is not
a malfunction.
[713
67
Loading ...
Loading ...
Loading ...