Loading ...
Loading ...
Loading ...
You'll need to enter a code for each component that you
want to control.
_Look the remote control code in
appropriate
up
the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD
_ player, TV, etc.).
While holding down REMOTE MODE to which
you want to enter a code, press and hold down
DISPLAY (about 3 seconds).
The remote indicator lights.
• Remote control codes cannot be entered for RECEIVER
andZONE 2.
• Only TV remote control codes call be entered for TV.
• Except for RECEIVER TV and ZONE 2, remote control
codes from ally category call be entered as REMOTE
MODE. However, these buttons also work as input selec-
tor buttons (_ 23), so choose a REMOTE MODE that
corresponds with the input to which you connect your
component. For example, if you connect your CD player
to the CD input, choose TV/CD when entering its remote
control code.
Within 30 seconds, use the number buttons to
enter the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered success-
fully, the remote indicator will flash once slowly.
!
• The remote control codes provided are correct at the time of
printing, but are subject to change.
Onkyo components that are connected via if41 are con-
trolled by pointing the remote controller at the AV
receiver, not the component. This allows you to control
components that are out of view, in a rack, for example.
_Make sure Onkyo component
the is connected
with an 1:/I cable and an analog audio cable
(RCA).
See "Connecting Onkyo 1-41 Components" for
details (_ 20).
Enter the appropriate remote control code for
REMOTE MODE.
• BD/DVD
31612:
Onkyo DVD player with 1-4I
• TV/CD
71327:
Onkyo CD player with RI
42157:
Onkyo cassette tape deck with R I
• PORT
_81993:
Onkyo Dock
See the previous section for how to enter remote
control codes.
• When using a cassette tape deck connected via 1"-41,press
and hold TV/CD to switch to TAPE.
Press REMOTE MODE,point the remote control-
ler at the AV receiver, and operate the component.
If you want to control an Onkyo component by pointing
the remote controller directly at it, or you want to control
an Onkyo component that's not connected via [-4 I, use the
following remote control codes:
• BD/DVD
30627:
Onkyo DVD player without 1-4 I
• TV/CD
71817:
Onkyo CD player without R I
11807:
Onkyo TV
If you want to control an Onkyo component by pointing the
remote controller directly at it, use the following remote
control codes:
32900:
Onkyo Blu-ray Disc player
32901:
Onkyo HD-DVD player
70868:
Onkyo MD recorder
71323:
Onkyo CD recorder
82990:
Onkyo Dock
• If you connect a cassette tape deck to the TV/CD IN jack, or
connect an R[ Dock to the to the TWCD IN or VCR/DVR IN or
GAME INjacks, for 1"41to work properly, you must set the [nput
Display accordingly (_ 25).
EF1
63
Loading ...
Loading ...
Loading ...