Loading ...
Loading ...
Loading ...
Step 1:
Make sure that each Onkyo component is connected
with an analog audio cable (connection _ in the hookup
examples) (@ 18).
Step 2:
Make the R I connection (see illustration below).
Step 3:
If you're using an RI Dock, or cassette tape deck,
change the Input Display (_ 25).
With R I (Remote Interactive), you can use the lY_llowing
special functions:
m System On/Auto Power On
When you start playback on a component connected via
fatI while the AV receiver is on Standby, the AV
receiver will automatically turn on and select that com-
ponent as the input source.
m Direct Change
When playback is started on a component connected via
f:t I, the AV receiver automatically selects that compo-
nent as the input source.
m Remote Control
You can use the AV receiver's remote controller to con-
trol your other f:t I-capable Onkyo components, point-
ing the remote controller at the AV receiver's remote
control sensor instead of the component. You must enter
the appropriate remote control code first (_ 63).
• Use only 1"-41cables for 1"-41connections. 1"-41cables are supplied
with Onkyo players (DVD, CD, etc.).
• Some components have two 1"-41jacks. You can connect either
one to the AV receiver. The other jack is for connecting addi-
tional 1"-4I-capable components.
• Connect only Onkyo components to f'-41jacks. Connecting other
manufacturer's components may cause a malfunction.
• Some components may not support all f-q1functions. Refer to
the manuals supplied with your other Onkyo components.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change 1"-41functions do not work.
This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won't pick up any radio signals without any antenna connected, so you must connect the antenna to use
the tuner.
North American and FM,_O--
Taiwanmode](_2 ._
European, Australian and
ian model(s =_
Thumbtacks, etc.
(supplied)
• Be careful that you don't injure yourself when
using thumbtacks.
Insert wire Release.
g the AM loop ant'enn_
AM loop antenna (supplied)
• Once your AVreceiver is ready for use, you'll need to tune into a radio station and position the antenna to achieve the best possible
reception.
• Keep the AM loop antenna as far away as possible from your AVreceiver, TV,speaker cables, and power cords.
• If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
EFI • If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM
20 antenna.
Loading ...
Loading ...
Loading ...