Loading ...
Loading ...
Loading ...
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DYD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PORT
Default assignment
IN1
IN2
.... (Fixed)
m BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TV/CD, PORT
IN1, IN2:
Select a corresponding component video input that
the video component has been connected.
} ..... :
Select if you are using HDMI output, not component
video output, to output composite video and compo-
nent video sources.
• If you connect a component (such as UP-AI Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign ally
input to PORT selector.
• When an HDMI IN is assigned to all input selector ill "HDM[
[nput" (3 39), this input assignment is automatically set to the
same NDMI IN. And ill addition to the usual inputs (e.g.,
COAXI, COAX2, etc.), you can also select HDM[ inputs.
• Available sampling rate for PCM signals from a digital input
(optical and coaxial) is 32/44.1/48/88.2/96 kHz/l 6, 20, 24 bit.
• If you connect a component (such as UP-AI Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
1
Some of the settings in this section are set automatically
by Audyssey 2EQ0_)Room Correction and Speaker
J
Setup function (3 25).
Here you can check the settings made by Audyssey 2EQ
Room Correction and Speaker Setup function, or set them
manually, which is useful if you change one of the con-
nected speakers after using Audyssey 2EQ Room Correc-
tion and Speaker Setup function.
These settings are disabled when:
• a pair of headphones is connected, or
• the "Audio TV Out" setting is set to "On" (3 51) and an input
selector other than HDMIis selected.
Speaker Settings
Digital Audio Input
Ell
4O
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPTI" to the "T¥/CD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PORT
Default assignment
(7()AXI
COAX2
OPTI
.... (Fixed)
OPT2
I BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TWCD, PORT
COAX1, COAX2, OPT1, OPT2:
Select a corresponding digital audio input that the
component has been connected.
..... :
Select if the component is connected to an analog
audio input.
If the impedance of any speaker is 4 ohms or more but less
than 6, set the minimum speaker impedance to 4 ohms.
If you bi-amp the front speakers, you must change the
"Speakers Type" setting (3 41).
For hookup information, see "Bi-amping the Front Speak-
ers" (3 15).
• When bi-amping is used, the AV receiver is able to drive up to
5.1 speakers in the main room.
• Before you change these settings, turn down the volume.
m Speaker Impedance
4ohms:
Select if the impedance of any speaker is 4 ohms or
more but less than 6.
6ohms:
Select if the impedances of all speakers are between
6 and 16 ohms.
• (North American and Taiwan modds) Speakers with an
impedance of less than 6 ohms are not supported.
Loading ...
Loading ...
Loading ...