1
Questions or Concerns? (855) 686-3835 • support@etekcity.com
Digital Kitchen Scale
Model No.: EK6212-S
2
Thank You.
Thank you for purchasing the EK6212-S Digital
Kitchen Scale by Etekcity. We are dedicated to
providing our customers with quality products
for building a better living. Should you have any
questions or concerns about using your new
product, feel free to reach out to our helpful
customer support team at (855) 686-3835 or by
email at support@etekcity.com. We hope you enjoy
your new product!
3
Package Contents
1 x Digi tal Kitchen Scale
2 x 1.5V AAA batteries
1 x U ser Manual
Table of Contents
Safety Information 4
Main Functions 5
Set-Up 6
Operation 7
Weight Measurement 7
Volume Measurement 8
Tare Function 9
Maintenance 9
Speci cations 10
Troubleshooting 11
Warranty 12
Customer Support 13
4
Safety Information
IMPORTANT: Please read and comply with all
of the instructions and warnings provided in this
manual before using the product. Failure to comply
with the instructions and warnings provided herein
may result in inaccurate results and/or damage to
the product itself.
• Always place the scale on a hard, dry, and flat
surface before measurement in order to ensure
accurate results.
• Dirt, dust, vibration, wind, air currents, and
electromagnetic interference may contribute to
inaccurate results.
• DO NOT exceed the 11 lb (5 kg) weight capacity;
doing so may damage the scale. An overload
indicator will appear on the LCD display if the
limit is exceeded.
• Avoid exposing the device to damp environments
or extreme temperatures.
• DO NOT immerse the scale in water or corrosive
liquids. If a liquid is spilled on the digital display
or buttons, immediately wipe the scale clean with
a soft cloth in order to avoid potential internal
damage.
• When replacing batteries, make sure to insert
them under the correct polarity as indicated
within the batt
ery compartment.
• If the low battery indicator is displayed, please
replace the batteries.
• DO NOT mix new and used batteries to power the
device.
• This scale is not intended for commercial or
heavy-duty use.
• Handle the scale with care. Keep the scale in a
cool, dry environment.
• If the scale fails to turn on, check if the batteries
are installed correctly. Replace the batteries if
necessary.
• If the scale is not in use for an extended period of
time, remove the batteries to conserve battery life
and extend the lifetime of the scale.
5
Main Functions
Digital Display
Function Diagram
1. Weighing Platform
2. LCD Display
3. Unit Button
4. Power/Zero Button
5. Anti-skid Padding
6. Battery Compartment
1. Weight Value
2. Tare Mode
3. Zero Weight
4. Negative Weight Value
5. Mode
6. Measurement Unit
1
3
2
1
6
3
4
5
5
2 4
6
Icon Mode Units Use
Weight Mode oz / lb:oz / g Measures the weight of food and solid objects.
Milk Volume ml Measures the volume of milk and other liquids with similar densities.
Water Volume ml Measures the volume of water and other similar liquids.
6
Set-Up
1. Open the battery compartment on the underside
of the scale.
2. Insert the included AAA batteries, making sure
they are under the correct polarity. Place the
battery cover back on.
3. Press the ‘Power/Zero’ button to turn on the
scale.
7
weight.
5. Press and hold ‘Power/Zero’ for 3 seconds to turn
off the scale.
Operation
Weight Measurement Mode
1. Place the scale on a flat, dry surface.
2. Press ‘Power/Zero’ to turn on the scale.
3. Press ‘UNIT’ to select your desired measuring
unit. Allow the scale to read zero before
measuring.
4. Gently place your object on the scale. The LCD
display will automatically display the object’s
NOTE: The scale with automatically turn off after 2
minutes of inactivity.
8
Volume Measurement Mode
1. Place the scale on a flat, level surface, then press
the power button to turn it on.
2. Press the ‘Unit’ button to select either the milk or
water volume measurement mode.
3. The scale will display “0” when ready.
4. Place an empty container onto the platform. The
screen will display the container weight.
5. Press the ‘Power/Zero’ button to tare the weight
of the container.
6. Once the screen displays “0” pour the liquid into
the container. The LCD screen will automatically
display the final volume.
NOTE: To reset, remove all weight from the platform
and press the ‘Power/Zero’ button.
9
Tare Function
The tare function allows you to measure objects in a
container without having to include the container’s
weight in the final measurement.
1. Place the scale on a flat, dry surface.
2. Power on the scale and wait for the display to
read zero.
3. Place an empty container on the scale and press
‘Power/Zero.’ The display will now show zero.
4. Place objects in the container, and the display will
show weight of the items.
5. Take the container off the platform when you
have finished weighing your items. Press ‘Power/
Zero’ once to reset the scale.
Maintenance
Use a slightly damp cloth to clean the surface of
the scale, followed by a dry soft cloth to wipe away
the remaining moisture. You can also use a dry soft
cloth to wipe off any dust that may be on the scale.
Be sure not to wash the device or immerse it in
water or any other liquids.
10
Specifications
Weight Capacity: 176.4oz / 11lb / 5000g / 5000ml
Units: oz / lb:oz / g / ml
Division Value: 0.1oz / 1g / 1ml
Auto-Off: 120 seconds
Backlight Auto-off: 30 seconds
Dimensions: 8.5” x 7.3” x 0.6” (217mm x 187mm x 16mm)
11
Troubleshooting
Problem Cause Solution
LCD display
is dim or
shows “Lo.”
Not enough power. Replace batteries.
Device does
not turn on.
Batteries are no longer good. Replace batteries.
Batteries not inserted correctly. Insert batteries under the correct polarity as
marked on battery compartment.
Display
shows “Err.”
Scale is placed on an uneven surface. Place scale on a flat, stable surface.
Scale needs to be reset. Remove the batteries, wait 10 seconds, then
replace the batteries.
Weight exceeds 11 lbs (5kg). Promptly remove object from scale to protect its
sensors.
Use a different scale with a higher weight range.
Objects exceeding 1000 g are on top of
scale before it is turned on.
Remove objects from scale; wait until display
reads zero before weighing.
Weight is unstable during measurement. Keep weight stable on the measuring platform.
12
Warranty
Terms & Policy
Etekcity Corporation (“Etekcity”) warrants this product to the original
purchaser to be free from defects in material and workmanship, under
normal use and conditions, for a period of 2 years from the date of original
purchase.
Etekcity agrees, at our option during the warranty period, to repair any
defect in material or workmanship or furnish an equal product in exchange
without charge, subject to verification of the defect or malfunction and
proof of the date of purchase.
There is no other express warranty. This warranty does not apply:
· If the product has been modified from its original condition;
· If the product has not been used in accordance with directions and
instructions in the user manual;
· To damages or defects caused by accident, abuse, misuse or
improper or inadequate maintenance;
· To damages or defects caused by service or repair of the product
performed by an unauthorized service provider or by anyone other than
Etekcity;
· To damages or defects occurring during commercial use, rental use, or
any use for which the product is not intended;
· To damages or defects exceeding the cost of the product.
Etekcity will not be liable for indirect, incidental, or consequential damages
in connection with the use of the product covered by this warranty.
This warranty extends only to the original consumer purchaser of the
product and is not transferable to any subsequent owner of the product
regardless of whether the product is transferred during the specified term
of the warranty.
This warranty does not extend to products purchased from unauthorized
sellers. Etekcity’s warranty extends only to products purchased from
authorized sellers that are subject to Etekcity’s quality controls and have
agreed to follow its quality controls.
All implied warranties are limited to the period of this limited warranty.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
If you discover that your product is defective within the specified warranty
period, please contact Customer Support via [email protected]. DO
NOT dispose of your product before contacting us. Once our Customer
Support Team has approved your request, please return the product with a
copy of the invoice and order ID.
Every Etekcity product automatically includes a 2-year warranty. To make
the customer support process quick and easy, register your product online
at www.etekcity.com/warranty.
This warranty is made by:
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Model EK6212-S
Product Name
Digital Kitchen Scale
For your own reference, we strongly recommend that
you record your order ID and date of purchase.
Order ID
Date of Purchase
13
Customer Support
Should you encounter any issues or have any questions regarding your new product, feel free to contact our
helpful Customer Support Team. Your satisfaction is ours!
Customer Support
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 92806
Toll-Free: (855) 686-3835
Fax: (657) 202-1693
Local: (657) 500-1872
Email: support@etekcity.com
Support Hours
Monday - Friday:
9:00 am - 5:00 pm PST
*Please have your order confirmation number ready
before contacting customer support.
Building on better living.
21H10_us
