Loading ...
Loading ...
Loading ...
f
ACCESSORIES
NUMBER
9-26641
9-26642
9-26645
9-26646
9-26647
9-26848
9-25064
DESCRBPTION
62" x 1/4" Blade 6 teeth
62" x 3/8" Blade 6 teeth
62" x 1/8" Blade 15 teeth
62" x 1/4" Blade 4 teeth
62" x 1/4" Blade 10 teeth
62" x 1/4" Blade 14 teeth
62" x 1"
)er inch - regular tooth
)er inch - regular tooth
3er inch
)er inch (skip)
)er inch
)er inch
Sanding Belts (Pkg. of 5) 100 grit
USE
solid wood
solid wood
finishing
general wood/plastic
brass/ferrous metals
steel cutting
wood finishing
The use of any other accessories not specified in this manual may create a hazard.
.J
TROUBLE SHOOTING
For your own safety, turn switch "OFF" and always remove plug from power source
outlet before trouble shooting.
TROUBLE
MOTOR WILL NOT RUN
BLADE DOES NOT RUN
IN THE APPROXIMATE
CENTER OF THE WHEELS
BAND SAW SLOWS
DOWN WHEN CUTTING
BLADES BREAKING
PROBABLE CAUSE
1. Defective ON/OFF switch.
2. Defective cord.
3. Defective Motor.
4. Defective speed control.
1. Not tracking properly.
1. Cutting too small a radius.
2. Dull blade.
1. Too much tension.
2. Kink in blade caused by cutting
too small a radius or turning the
material too fast when cutting.
REMEDY
1. Return unit to your nearest Sears Service Center.
1. Adjust tracking, See Assembly Section,
"Tracking the Blade".
2. Check for proper tension.
1. Stop feeding, and back up to the material
slightly, until the band saw speeds up.
2. Replace blade.
1. Adjust tension, See Assembly Section,
"Installing the Blade",
2. Use correct cutting technique. See
"Operation" Section.
J
IMPORTANT:Your Band Saw is Preset at the factory for a 1/4" woodcutting blade (included). No thrust roller or
tracking adjustment should be necessary if your inital use is with this blade.
Page 11
Loading ...
Loading ...
Loading ...